Powerpanel Flex solar modules - 80 to 160 watts

The flexible Carbest solar modules deliver more power than conventional PV modules of the same size. Thanks to the high-quality ETFE surface with honeycomb structure, results in twilight and cloud cover a significant performance plus. The special back-contact technology of the solar cells, allows bending radii of up to 20 °.

Particularly at high temperatures, the performance is significantly higher than comparable modules. This means maximum efficiency without a drop in performance. The pre-assembled solar cable shortens installation time and with 6/8m length is also sufficient for large vehicles. The above-average bending capability also makes the Carbest modules ideal for maritime applications. We recommend a MPPT charge controller (eg 851005 or 851006).

Note to item 85333 (160 watts): Shorter panel dimension due to rear connection box.

Material cover layer:

• ETFE: Very hard and thin (approx. 0.025 mm) material with high light transmission of approx. 95%. Heat resistant up to approx. 150°C. Very high weather resistance, also suitable for salt water.

Material carrier plate:

• TPT: Material mir high bending strength. More flexible than fiberglass.
• Fiberglass: Very strong, hard material for the best possible protection of the solar cells. 

Installation advice:

All Flex modules must be glued over the entire surface (without air pockets). Subsequently, all module edges must be completely sealed up to the top cover layer.

This solar panel must not be used with Victron controllers!